Expansion ModuleThe expansion module has a height of 22 cm.The Ferminator can be expanded with several expansion modules an additional cooling/ heating unit on the back. The expansion module and Ferminator can be disassembled taking up minimal storage space.

Vi har tagit allt det bästa från Ferminator Basic och gjort en ny version med WiFi och Bluetooth. Det är nu möjligt att styra din Ferminator online och se aktuella temperaturer och inställningar. I BrewCreator kan du lägga in data om din brygd och se all information om din Ferminator Connect. Det hela är samlat i en snygg detaljerad graf, där du kan följa temperaturens förlopp och se de förändringar som har gjorts. Ferminator Connect kan även kommunicera direkt med Graviator - en trådlös hydrometer som mäter direkt i jäskärlet (säljes separat).Vid rumstemperatur (20°) kan temperatren sänkas till 0° eller ökas till 50°*. Ett kraftigt termoelektriskt Peltier-element som står för kylan, fläkten leder bort den värme som alstras i processen. Höjden på Ferminator kan enkelt expanderas med 22cm höga expansionsmoduler som köpes seperat. I grundutförandet får det plats t.ex ett 30L plastjäskärl eller en 30L Fermzilla Flat Bottom.OBS! Kan enbart skickas med DHL pga storleken.FerminatorFerminator is a revolution in temperature-controlled fermentation. With a Ferminator it is now possible to ferment at a precise and stable temperature. At room temp. (20°) the Ferminator can lower the temp. to 0° and raise it to 50°*. The height can easily be extended with optional 22cm high expansion modules (buy seperately).- The Ferminator makes is possible to ferment at the precise desired temperature. For example, it is possible to ferment a pilsner or lager at the proper low temperature or an ale at high temperature to achieve lots of desired esters.- The Ferminator keeps the temperature constant during the fermentation process and can of course be adjusted at any time. A constant fermentation temperature ensures unwanted flavour notes can be avoided and that the yeast will go into a hibernation state.- The Ferminator gives you full control over the fermentation and lets you experiment with completely new flavour notes and profiles.Cooling/Heating Unit- At room temperature (20°C) the Ferminator can lower the temperature to 0C and raise the temperature to 50°C*.- Lowers temperature down to 20°C relative to ambient temp*.- Raises the temperature up to 30°C relative to ambient temp*.- The built-in fan ensures evenly temperature throughout the Ferminator.- The control unit is easily programmed and displays the actual temperature and set temperature.- The temperature sensor can be mounted either on or inside the fermentation unit with a thermowell thereby measuring the precise temperature of the liquid.- Maximum power consumption: 75 Watts, standby: 1 Watt. *Tested with Ferminator Basic, when using expansion modules, an additional Cooling/Heating Unit may be required.Ferminator Connect- Dimensions outside: 560 L x 560 B x 651 H- Dimensions inside: 436 L x 436 B x 531 HSize fits:32 L. Fermenter30 L. FermZilla Flat BottomMaterialFerminator is made in EPS.Optional Expansion (Not Included, buy it seperately below)Expansion ModuleThe expansion module has a height of 22 cm.The Ferminator can be expanded with several expansion modules an additional cooling/ heating unit on the back. The expansion module and Ferminator can be disassembled taking up minimal storage space.Note that some product images contain extra equipment not included.

Conicus Pro 30L är ett koniskt jäskärl i rostfritt stål som klarar maxtryck upp till 2 bar (1 bar arbetstryck). Conicus Pro är tillverkad av högkvalitativt rostfritt stål och är robust, hållbar och designad för att ta din hembryggningsupplevelse till nästa nivå. Med ett unikt 3-tums siktglas som gör att bryggare kan observera öl, nivå och jäsningsprocessen som aldrig förr.Conicus Pro by BrewolutionHomebrewing enthusiasts, meet the Conicus Pro! The essence of innovation and functionality in the world of homebrewing and stainless-steel conical fermenters or Unitanks for short. This is not just another pressurised conical fermenter; it is the realisation of every homebrewer's ultimate dream, offered at a price range accessible to all. Made from quality stainless steel, the Conicus Pro is robust, durable, and designed to elevate your home brewing experience. All the ports you needConicus Pro comes with all the features and ports you need. Including a 1.5” tri-clamp stainless-steel butterfly sample valve and a 2” tri-clamp stainless-steel butterfly dump valve. It has an operating pressure of 1 bar. The Conicus Pro stands as a testament to advanced fermenting technology.3-inch Sight GlassThe unique 3” sight glass is a game-changer, allowing brewers to observe the beer, level, and fermentation process like never before. Additionally, the sight glass is designed for the future with focus and features for digital hydrometers. The sight glass lets transmission from devices like the Graviator or other digital hydrometers escape, ensuring data flow and precise monitoring of your brew.CIP CleaningThe fantastic feature of the Conicus Pro is its capability for CIP (Clean-In-Place) cleaning. This method is not only easy and quick but also incredibly effective, guaranteeing comprehensive cleaning and sanitation.Temperature ControlStainless steel allows for effective temperature control. The Conicus Pro fits inside the Ferminator. With the Ferminator you can set the desired temperature and maintain this accurate temperature stable during the fermentation. It can also be easily integrated with an insulated jackets and coil chiller or other temperature control systems, providing stability during fermentation.In the box1x Conicus Pro Stainless-steel Fermenter1x 1,5” tri-clamp stainless-steel butterfly valve1x 2” tri-clamp stainless-steel butterfly valve1x 2” tri-clamp elbow 90°1x 3” Sight glass incl. 2 x gasket5x 1,5” tri-clamp blind cap1x 2” tri-clamp blind cap1x 4” tri-clamp blind cap5x 1,5” tri-clamp gasket4x 2” tri-clamp gasket1x 4” tri-clamp gasket5x 1,5” tri-clamp3x 2” tri-clamp1x 4” tri-clamp1x Airlock, 3-Piece1x Silicone Bung1x ManualSpecifications- Max volume 32 L. (Minimum Brew Size is 12-15L)- Max brew volume: 28-30* L. Read more in FAQs - Min brew volume: 12-15* L. Read more in FAQs - Working pressure 1 bar, max pressure 2 bar - Matt stainless-steel finish on the outside.- Super smooth stainless-steel finish on the inside.- Liter and US gallon scale on the inside.- 3” Sight glass with liter and US gallon scale- Stainless steel AISI 304- Lid: 1 x 4” port, 2 x 1,5” ports, 1 x 2” port- Body: 4 x 1,5” ports- 1,5” tri-clamp stainless-steel butterfly sample valve- 2” tri-clamp stainless-steel butterfly dump valve- 2 stainless steel handles- Airlock, 3-piece, and silicone bung incl.- Tree fixed legsSize & WeightHeight: 79,5 cm (87 cm with airlock)Diameter at the top: 42 cmWeight Gross: 18 kgWeight Net: 13.5 kg- See product image gallery for dimensions

Isoleringsjackan hjälper till att behålla värmen som genereras under jäsningen och förbättra jäskärlets prestanda, även när du jäser i ett kallt rum. Jackan är också ett måste om du har lock med spiralkylare, och kan hjälpa till med en ännu mer kontrollerad och effektiv temperaturreglering inuti jäskärlet.Isoleringstjocklek: 6 mm.Material: slitstarkt och robust styrenbutadiengummi.

The 4” Lid with Coil Chiller is a exceptional brewing accessory designed for use with water, glycol chiller or similar systems. This tri-clamp 4” Lid with Coil Chiller will fit many fermenters e.g., Conicus Pro, Ss Brewtech, Brewtools, Brew Monk etc. Perfect for Conicus Pro 55L.The core of this product is its stainless steel chilling coil. Immersed directly in your fermenting beer, it works efficiently to maintain ideal fermentation temperatures. The coil is crafted from high-quality stainless steel and is easy to clean, ensuring durability and reliability in your brewing process. Its length and width are thoughtfully designed to fit perfectly within the Conicus Pro 4" opening or similar systems.Installing the chilling coil is straightforward. It involves fitting the coil into the 4" opening and close it with the Tri-Clamp. For cooling, you will need an insulated tubing kit (either the one provided or your own), which connects the coil to your glycol chiller. This setup is vital for precise temperature control during fermentation, especially crucial when brewing lagers, which require colder fermenting temperatures.The 4" Lid with Coil Chiller also offers an efficient solution for cold crashing your beer. Cold crashing is a technique used to improve beer clarity and mouthfeel by bringing the beer to a low temperature, causing residual yeast and other particles to settle at the bottom of the fermenter.You can easily connect water, glycol chiller or similar systems to the inlet and outlet to the two male connections.We recomend bying the Conicus Pro 30 Insulation jacket with this Coil ChillerFeatures:521 mm long stainless-steel spiral cooler4" LidLid mounted two male connections for water or glycol chillerWith beer and Co2 postAISI 304 stainless-steelEasy to clean.Intergrated in the lid is a beer and CO2 post for carbonating and dispensing the beer. These posts are smart integral parts of the lid: one for adding gas (CO2) and the other for dispensing the liquid (beer).If you want to control the temperature during the fermentation the Conicus Pro can be mounted with this optional lid with a build-in cooling coil. This is a very simple, but effective way of controlling the temperature inside the fermenter.We recomend using the Ferminator for a more easy, effective and precise temperature regulating.This tri-clamp 4” Lid with Coil Chiller will fit many fermenters e.g., Conicus Pro, Ss Brewtech, Brewtools, Brew Monk etc.

The 4” Lid with Coil Chiller is a exceptional brewing accessory designed for use with water, glycol chiller or similar systems. This tri-clamp 4” Lid with Coil Chiller will fit many fermenters e.g., Conicus Pro, Ss Brewtech, Brewtools, Brew Monk etc.  Perfect for Conicus Pro 30L.The core of this product is its stainless steel chilling coil. Immersed directly in your fermenting beer, it works efficiently to maintain ideal fermentation temperatures. The coil is crafted from high-quality stainless steel and is easy to clean, ensuring durability and reliability in your brewing process. Its length and width are thoughtfully designed to fit perfectly within the Conicus Pro 4" opening or similar systems.Installing the chilling coil is straightforward. It involves fitting the coil into the 4" opening and close it with the Tri-Clamp. For cooling, you will need an insulated tubing kit (either the one provided or your own), which connects the coil to your glycol chiller. This setup is vital for precise temperature control during fermentation, especially crucial when brewing lagers, which require colder fermenting temperatures.The 4" Lid with Coil Chiller also offers an efficient solution for cold crashing your beer. Cold crashing is a technique used to improve beer clarity and mouthfeel by bringing the beer to a low temperature, causing residual yeast and other particles to settle at the bottom of the fermenter.You can easily connect water, glycol chiller or similar systems to the inlet and outlet to the two male connections.We recommend buying the Conicus Pro 30 Insulation jacket with this Coil Chiller.Features:338 mm long stainless-steel spiral cooler4" LidLid mounted two male connections for water or glycol chillerWith beer and Co2 postAISI 304 stainless-steelEasy to clean.Intergrated in the lid is a beer and CO2 post for carbonating and dispensing the beer. These posts are smart integral parts of the lid: one for adding gas (CO2) and the other for dispensing the liquid (beer).If you want to control the temperature during the fermentation the Conicus Pro can be mounted with this optional lid with a build-in cooling coil. This is a very simple, but effective way of controlling the temperature inside the fermenter.We recommend using the Ferminator for a more easy, effective and precise temperature regulating.This tri-clamp 4” Lid with Coil Chiller will fit many fermenters e.g., Conicus Pro, Ss Brewtech, Brewtools, Brew Monk etc.

This is a stainless-steel tri-clamp sample valve with a rotating rack arm mounted on a 3/8" tap with 13 mm barb. It is easy to mount.This valve can also be used for bottling directly from your Fermenter.This tri-clamp sample valve with racking arm will fit many fermenters e.g., Conicus, Ss Brewtech, Brewtools, Brew Monk etc.AISI 304 stainless-steel.Mounted valve for easy opening and closing.Easy to clean.Easy to mount.Tri-clamp standard.

This is a stainless-steel tri-clamp sample valve with a rotating rack arm mounted on a 3/8" tap with 13 mm barb. It is easy to mount.This valve can also be used for bottling directly from your Fermenter.This tri-clamp sample valve with racking arm will fit many fermenters e.g., Conicus, Ss Brewtech, Brewtools, Brew Monk etc.AISI 304 stainless-steel.Mounted valve for easy opening and closing.Easy to clean.Easy to mount.Tri-clamp standard.